How do I prepare the working solution?

Dilute 200 ml (2 dl) of product with 10 litres of water, spread it over the surface and let it act for 30 minutes while keeping the surface wet throughout.

Can I mix it with other cleaners?

No, the product must not be mixed with other agents, and direct contact must be avoided. Always prepare the working solution fresh.

What is the contact time?

The working solution must be left on the surface for 30 minutes, keeping the surface wet during that time.

Cleaneco Sterilfresh Chlorine-Based Cleaner Concentrate, 1 L

Name: Cleaneco Sterilfresh Chlorine-Based Cleaner Concentrate, 1 L
Brand: Cleaneco
SKU: 1199
Price: 1438 HUF
Availability: OutOfStock

Chlorine-based concentrated cleaner for washable, alkali-resistant floors and coverings. Strong cleaning and disinfecting action, with a 30-minute contact time.

The 1-litre concentrate is a practical choice for the regular cleaning and disinfection of a smaller area. Cleaneco Sterilfresh is a chlorine-based concentrated cleaner for washable, alkali-resistant floors, coverings and the surfaces of fittings and equipment. It is a liquid concentrate to be diluted with water.

What it is for

It is suitable for cleaning the surfaces of washable, alkali-resistant floors, coverings and equipment, where the chlorine-based formula delivers strong cleaning and disinfecting action. For both consumer and professional use.

Use and contact time

Prepare a working solution: dilute 200 ml (2 dl) of the product with 10 litres of water. Spread the working solution over the surface and let it act for 30 minutes. Make sure the surface stays wet during the contact time. Always prepare the working solution fresh, immediately before use. Do not mix with other products and avoid direct contact with the product.

Composition

Contains: Amines, C12-14-alkyldimethyl, N-oxides, sodium hydroxide, sodium hypochlorite solution, active chlorine. Per Regulation 648/2004/EC: less than 5% anionic surfactants, less than 5% amphoteric surfactants, less than 5% chlorine-based bleaching agents.

Active ingredients explained

Sodium hypochlorite is the well-known active ingredient of chlorine-based bleaches and disinfectants: strongly cleaning and germ-killing. When using biocidal active ingredients, always pay attention to safety, and read the label and instructions before use.

Safety and warnings

The product is chlorine-based and corrosive, so the following warnings must be observed:

Causes severe burns and eye damage (H314).
Very toxic to aquatic life (H400).
Toxic to aquatic life with long-lasting effects (H411).
Keep out of reach of children (P102).
Wear protective gloves, protective clothing and eye/face protection (P280).
If swallowed, rinse the mouth; do not induce vomiting (P301+P330+P331).
If on skin or hair, take off all contaminated clothing immediately and rinse the skin with water or shower (P303+P361+P353).
If in eyes, rinse cautiously with water for several minutes; remove contact lenses if easy to do, then continue rinsing (P305+P351+P338).
Immediately call a doctor (P310).
Collect spillage (P391).
Dispose of contents and container in accordance with local, regional, national and international regulations (P501).