The Cleaneco alcohol surface disinfectant in its 5-litre canister is the economical choice for higher-consumption sites. The large pack makes it easy to refill smaller trigger-spray bottles, so a fast hygienic surface disinfectant is always on hand.
What it is for
It can be used in healthcare facilities, public institutions, schools and households for hygienic rapid disinfection of alcohol-resistant surfaces. The product is a biocidal surface disinfectant classified under product type 2.
Use and dosage
Decant the disinfectant into a trigger-spray bottle and apply it evenly to the alcohol-resistant surface. Contact time: 1 minute. Because of the high alcohol content, do not use too much at once: a maximum of 50 ml/m². The treated surface does not need to be rinsed or wiped.
Composition
Biocidal active substance: (bio)ethyl alcohol, responsible for the fast disinfecting action and short drying time.
What do the claims mean?
The product is virucidal, meaning it destroys viruses, bactericidal, that is effective against bacteria, and fungicidal, so it also acts against fungi and fungal spores. This combined action makes it suitable for hygienic disinfection.
Safety and warnings
Because of its high alcohol content, the product is flammable. Please observe the following before and after use:
- Highly flammable liquid and vapour.
- Causes serious eye irritation.
- Keep out of reach of children.
- Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke while using it.
- Avoid breathing in mist, vapours or spray.
- If it gets in the eyes: rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do, then continue rinsing. If eye irritation persists, seek medical attention.
- Dispose of the contents and container by handing them to an authorised waste handler or returning them to the supplier.
Storage and good to know
Store the product in a cool, well-ventilated place, away from heat and ignition sources and open flames, and out of reach of children. Use it only on alcohol-resistant surfaces; on sensitive or lacquered surfaces it is best tested first on an inconspicuous area. Thanks to the high alcohol content the product dries quickly and leaves no residue on the surface.